Amount: 0.00 €
Next Generation Positioning Cushions were designed to stabilize positioning and distribute pressure to create an optimal position for the individual.
The pillows contain oval dynamic balls that are both soft and hard. Even after 50,000 times the compressive load, the balls retain their oval shape. All balls are sealed, waterproof, antibacterial and fireproof.
Next Generation positioning pillows have the weight and stability to ensure that a person will lie in the desired position without the pillows collapsing or slipping over time under stress. The pillows can be modulated in small areas and maintain the desired shape to support the individual. They are also characterized by minimal heat accumulation and, as a result, humidity.
The cover is made of breathable, elastic, waterproof, antibacterial and fire-resistant polyurethane. It is EN14126 certified against ingress and is also used as a PPE class 3B standard against ingress of viruses.
Next Generation positioning pads can be quickly washed off with disinfectants and dried in a few minutes.
The supine/recline shape of the cushion helps prevent poor postures such as adduction and abduction around the knee. It can be used advantageously in combination with the knee pillow, small article NTG05, the large knee pillow, article NTG06, or the U-shaped inclined pillow, article NTG02. This prevents incorrect pelvic posture, which is always the main starting point for incorrect postures.
In addition, the pillow can be used in cases where the bed hinges do not correspond to the human anatomy. In these cases, in combination with a head stabilizer, part number NTG09, or a cylinder pad, part number NTG11, if the first signs of ankle misalignment, also called “foot drop,” appear.
SPECIFICATIONS
Cleaning
Overdrying with disinfectants
Textile
Stretchable and durable
Waterproof
Yes
Approved according to ISO 811.
Textile fabrics - determination of resistance to water penetration - hydrostatic pressure test
Antibacterial
Yes
Approved according to:
BS EN ISO 2286-2
Rubber or plastic coated fabrics. Determination of roll characteristics. Methods for determining total mass per unit area, mass per unit area of coating and mass per unit area of substrate.
ISO 5978
Rubber or plastic coated fabrics - determination of block resistance
BS ISO 22196
Plastics – measurement of antibacterial activity on plastic surfaces.
Breathing
Yes
Approved to ASTM E96/E96M.
Fire retardant material
Yes
Approved to BS EN ISO 6940.
Textile fabrics - combustion behavior - determination of ease of ignition of vertically oriented samples
Biocompatibility
Yes
BS EN ISO 10993-5 approved.
Biological evaluation of medical devices. Part 5: In vitro cytotoxicity tests.
Durability
Yes
Approved to BS EN ISO 7854.
Rubber or plastic coated fabrics - determination of resistance to bending damage
Protective clothing
Yes
BS EN 14605 approved.
Protective clothing against liquid chemicals - performance requirements for clothing with sealed (type 3) or splash-proof (type 4) connections, including products that provide protection only to parts of the body (types PB [3] and PB [4])
Antistatic
Yes
Approved according to DIN ISO 2878.
Vulcanized rubber - antistatic and conductive products - determination of electrical resistance
The image is illustrative
The pillows contain oval dynamic balls that are both soft and hard. Even after 50,000 times the compressive load, the balls retain their oval shape. All balls are sealed, waterproof, antibacterial and fireproof.
Next Generation positioning pillows have the weight and stability to ensure that a person will lie in the desired position without the pillows collapsing or slipping over time under stress. The pillows can be modulated in small areas and maintain the desired shape to support the individual. They are also characterized by minimal heat accumulation and, as a result, humidity.
The cover is made of breathable, elastic, waterproof, antibacterial and fire-resistant polyurethane. It is EN14126 certified against ingress and is also used as a PPE class 3B standard against ingress of viruses.
Next Generation positioning pads can be quickly washed off with disinfectants and dried in a few minutes.
The supine/recline shape of the cushion helps prevent poor postures such as adduction and abduction around the knee. It can be used advantageously in combination with the knee pillow, small article NTG05, the large knee pillow, article NTG06, or the U-shaped inclined pillow, article NTG02. This prevents incorrect pelvic posture, which is always the main starting point for incorrect postures.
In addition, the pillow can be used in cases where the bed hinges do not correspond to the human anatomy. In these cases, in combination with a head stabilizer, part number NTG09, or a cylinder pad, part number NTG11, if the first signs of ankle misalignment, also called “foot drop,” appear.
SPECIFICATIONS
Cleaning
Overdrying with disinfectants
Textile
Stretchable and durable
Waterproof
Yes
Approved according to ISO 811.
Textile fabrics - determination of resistance to water penetration - hydrostatic pressure test
Antibacterial
Yes
Approved according to:
BS EN ISO 2286-2
Rubber or plastic coated fabrics. Determination of roll characteristics. Methods for determining total mass per unit area, mass per unit area of coating and mass per unit area of substrate.
ISO 5978
Rubber or plastic coated fabrics - determination of block resistance
BS ISO 22196
Plastics – measurement of antibacterial activity on plastic surfaces.
Breathing
Yes
Approved to ASTM E96/E96M.
Fire retardant material
Yes
Approved to BS EN ISO 6940.
Textile fabrics - combustion behavior - determination of ease of ignition of vertically oriented samples
Biocompatibility
Yes
BS EN ISO 10993-5 approved.
Biological evaluation of medical devices. Part 5: In vitro cytotoxicity tests.
Durability
Yes
Approved to BS EN ISO 7854.
Rubber or plastic coated fabrics - determination of resistance to bending damage
Protective clothing
Yes
BS EN 14605 approved.
Protective clothing against liquid chemicals - performance requirements for clothing with sealed (type 3) or splash-proof (type 4) connections, including products that provide protection only to parts of the body (types PB [3] and PB [4])
Antistatic
Yes
Approved according to DIN ISO 2878.
Vulcanized rubber - antistatic and conductive products - determination of electrical resistance
The image is illustrative